Generate: GaugeCalXP Pressure Comparator

The GaugeCal XP is a portable, self contained, hydraulic pressure comparator for the calibration of pressure gauges rated up to 700 bar or 10,000 PSI.

Fast, portable, low cost, easy to operate pressure comparator!

The GaugeCalXP is a portable, self contained, hydraulic pressure comparator for the calibration of pressure gauges up to 10 000 PSI/700 bar. Gauge is not included.

Pressure: 0 to 10 000 psi / 700 bar /70 MPa
Vacuum: 0 to -12 psi / -0.08 bar / -80 kPa
Use without fluid for calibrating differential pressure transmitters. Imagine smooth, continuous pressure generation to 400 inches H₂O (995 mbar) to within 0.01 inches (0.025 mbar) without fear of over pressurization. It makes calibrating DP transmitters fast, safe and easy.
Unique Gauge-Safe integral venting system design prevents damage to mechanical gauges
Faster to use than a deadweight tester and most automated pressure controllers
Easy to operate
Low cost
Can be used with water, oil or air
Skydrol compatible version available

Applications

Field and laboratory pressure source
Low cost replacement for hydraulic ram screws on deadweight testers
Ideal for calibrating low cost gauges that are often overlooked for ISO9000 compliance

Two pressure ports are provided. Connect a reference grade gauge on one port (we recommend an XP2i Digital Pressure Gauge) and the gauge to be tested on the second port. Rotate the handle clockwise until the desired pressure is generated. Then, compare the displayed pressure values between the reference gauge and the gauge under test.

Pressure can be set very quickly and precisely. Gauges can be calibrated in less than ten minutes with 5 to 10 test points, increasing and decreasing pressure. The comparator can be filled with oil, water, or even air, allowing for clean and safe calibration of most gauge types.

Specifications

Portable
The GaugeCalXP Small footprint can be mounted anywhere. An optional rolling case is available with room for gauges, fittings and miscellaneous accessories that might be needed for a portable gauge calibration workshop.

Performance

Hydraulic
Maximum pressure: 10 000 psi / 700 bar
Minimum pressure: 5 psi / 0.5 bar

Pneumatic
Maximum pressure: 400 in H₂O / 995 mbar
Sensitivity: pressure: 0.01 in H₂O / 0.025 mbar

Burst Pressure: >20000 psi / 1400 bar

Materials

Ram/Adapters: 316SS

Body: Anodized Aluminum

Seals (Standard): Buna N (Nitrile)

Seals (Skydrol-compatible): EPDM

Test Media: Water, Oil, or Air

Connections
Base: CPF, Female,

Pressure connection: 1/4"Female NPT

Fittings (included): (2) MPF-1/4FPT, (2) MPM-MPM

Test Media
Water, light oil, or air

Dimensions

Length (of base): 429mm (16.88")

Length (overall): 495mm (19.50")

Width (of base): 175mm (6.88")

Weight: 6.4kg (14.2 lbs)

Piston Stroke Volume: 1.8 in³/ 29.5 cm³

Reservoir Volume: 3.35 in³/ 54.9 cm³

Software

Part No.
FastCalXP	FastCalXP software with our GaugeCalXP enables you to calibrate Gauges and Transmitters 7 to 10 times faster than other methods with fewer measurement errors. Just imagine having an empty incoming calibration shelf and being able to offer "while you wait" and "quick turn-around" services to your customers. See Demo

Accessories

Part No.
XP2i	XP2i: A digital pressure gauge with a 0.1% of reading accuracy. It is a very rugged, intrinsically safe, digital pressure gauge with 0.1% of reading accuracy.
30 Series	30 Series: A wide range pressure calibrator with 0.05% of reading accuracy that fits easily into a shirt pocket. There are no external transducers! Everything is built in!
4013	CPF NPT Quick Test Fitting Kit: Fast and easy gauge changes without tools or thread tape. Simply finger tighten and the connection will be leak free up to 10 000 psi / 700 bar / 70 MPa. Includes 3 fittings: P/N MPF-1/8QTF, 1/8” female NPT P/N MPF-1/4QTF, 1/4” female NPT P/N MPF-1/2QTF, 1/2” female NPT
4015	CPF BSPP Fitting Kit: Wrench tighten and the connection will be leak free up to 10 000 psi / 700 bar / 70 MPa. Includes 4 fittings: P/N MPF-1/8” BSPF, G1/8 female P/N MPF-1/4” BSPF, G1/4 female P/N MPF-3/8” BSPF, G3/8 female P/N MPF-1/2” BSPF, G1/2 female
3395	Carrying Case Rolling, weather-proof, case. Includes (2) MPF-CAP, (2) hold-down straps, and fluid bottle.
3205	Fine Adjust Kit
4138	Rebuild Kit
4158	Rebuild Kit - Skydrol