Measure / Calibrate: 30 Series

Calibration tool box in the palm of your hand!
*

The 30 Series is a wide range pressure calibrator that fits easily into a shirt pocket with 0.05% of reading accuracy. There are no external transducers! Everything is built in! There are two models to choose from: Model 31s have one sensor, while Model 33s have two sensors.

Small enough to fit in your shirt pocket, but big enough to handle all your calibration needs
Wide pressure range can measure vacuum and high pressure up to 5000 PSI (300 bar)
Indicates milliamps to calibrate transmitters
Ultra compact and light
High accuracy
Battery operated
Digital interface
Brings laboratory accuracy to outdoor field conditions

*ATEX version is optional

Applications

Deadweight tester replacement
Flow computer calibration
Gauge calibration
Pressure regulator adjustment
Pressure transmitter calibration

Included with every new 30 Series Digital Pressure Calibrator an A2LA accredited calibration certificate with test data recorded at 5 different temperatures - proving that it meets published specifications over the entire operating range. You won't get this kind of detailed report anywhere else!

Specifications

Specifications include all effects of linearity, hysteresis, repeatability, temperature, and stability for one year.

Accuracy
0 to Full Scale: ±(0.05% of Reading + Floor Term*)
*Floor Term = 0.005% of FS or display resolution, whichever is greater.
Vacuum: ±(0.25% of Reading + Vacuum Floor Term*)
* Vacuum Floor Term (VFT):
For 16 and 36 PSI, VFT = 0.004 PSI
For 300 PSI, VFT = 0.01 PSI
For 1 or 2 bar, and 100 or 200 kPa, VFT = 0.03 kPa or 0.0003 bar
For 20 bar or 2000 kPa, VFT = 0.1 kPa or 0.001 bar

Vacuum operation is not specified for 600 PSI (40 bar/4000 kPa models and higher. However, all models can be safely connected to vacuum.
(Not recommended for continuous use at high vacuum.)

Temperature
Operating & Compensated: 0°C to 50°C (32°F to 122°F).
Storage: -20°C to 70°C (-4°F to 158°F).

Electrical
Range: 0 to 55 mA
Resolution: 0.001 mA
Accuracy: ±(0.025% of Reading + 0.001 mA)
Percentage Conversion: 4 mA = 0.00%; 20mA = 100.00% or 10 mA = 0.00%; 50 mA = 100.00%

Intrinsic Safety
Exia Intrinsically Safe, Class I, Groups A, B, C & D, Temperature code T4

*ATEX version is optional

Connections
Pressure connection: 1/8" female NPT.
Electrical connection: 4mm jacks, 19mm (0.75") spacing.

Media Compatibility
Liquids and gases compatible with PTFE (Polytetrafluoroethylene) penetrated and anodized aluminum sensor manifold, 316 stainless steel (sensor), PTFE can be eliminated, if required, by specifying option SPSS, in which case aluminum manifold(s) will be replaced with stainless steel manifold(s).

Note: Over-range occurs at 110% of full scale, causing "HP Over" or "LP Over" to be displayed.

Standard factory setting is 1"H₂O = 0.036126 PSI (density of water @ 4°C). Specify at time of order if you require a different density (e.g., for water @ 68°F, 1"H₂O= 0.036063 PSI).

Power
Battery: One 9V battery.
Battery life: 90 hours typical (alkaline battery).
Low battery indicator: Displayed battery icon.

Enclosure
Description: Extruded Aluminum with sealed membrane keypad.
Dimensions: 29mm (1.15") D x 70mm (2.75") W x 130mm (5.4") L
Weight: Model 33: 400g (14.0 oz), Model 31: 342g (12.0 oz),
Model 31(1500 PSI and above): 360g (13.0 oz)

Sensor
All welded stainless steel sensor

Pressure Ranges

Pressure Ranges				Pressure Units and Resolution
PSI	bar	kPa¹	Over pressure	PSI	kg/cm²	Inch Hg	inch H₂O	mm Hg	cm H₂O	mm H₂O	kPa	MPa	mbar	bar
16²	1^{3 & 4}	100⁴	6.5x	0.001	0.0001	0.001	0.01	0.01		1	0.01		0.1	0.0001⁴
36²	2^{3 & 4}	200⁴	3.0x	0.001	0.0001	0.001	0.01	0.01		1	0.01		0.1	0.0001⁴
300	20	2000	2.0x	0.01	0.001	0.01	0.1	0.1	1		0.1			0.001
600	40	4000	2.0x	0.01	0.001						0.1	0.0001		0.001
1500	100	10000	2.0x	0.1	0.01						1	0.001		0.01
3000	200	20000	1.5x	0.1	0.01						1	0.001		0.01
5000	300	30000	1.5x	0.1	0.01						1	0.001		0.01

1- kPa versions are restricted to kPa, MPa, bar and/or millibar, depending on pressure range.
2 - PSI versions with ranges of 36 PSI and lower include all possible scales except bar.
3 - Bar versions with ranges of 2 bar and lower include all scales except inch Hg, cm H₂O and MPa.
4 - Applies to bar and kPa version only.

			Second Pressure Range				ATEX ONLY
			300 PSI	600 PSI	1.5K PSI	3K PSI	5K PSI
			20 bar	40 bar	100 bar	200 bar	300 bar
			2K kPa	4K kPa	10K kPa	20K kPA	30K kPa
First Pressure Range
16 PSI	1 bar	100 kPa	x	x	x	x	x
36 PSI	2 bar	200 kPa	x	x	x	x	x
300 PSI	20 bar	2K kPa	n/a	n/a	x	x	n/a

Model 33 calibrators, including all ATEX models, have dual pressure sensors. This chart shows all of the sensor combinations.

Options

Part No.
AX	ATEX– Option For Model 33 calibrators only ATEX pressure calibrators meet all the requirements set forth by the EU for equipment that may be operated in potentially explosive environments
-SPSS	Stainless Steel Manifolds All high pressure sensors come with a stainless steel manifold. Some applications require that the second sensor on a 30 Series be stainless steel as well
Crystal Care	Crystal Care Program (US and Canada customers only) A 3-year full warranty program covering virtually any failure and an annual A2LA accredited calibration certificate with test data recorded at 5 different temperatures - proving that it meets published specifications over the entire operating range

Software

Part No.
ConFigM30	ConFigM30 Allows you to customize your calibrator by adding or disabling features FREE Download
LabVIEW driver	LabVIEW driver If using LabVIEW, the driver library implements the serial commands of the Model 30 and provides parsing of the streaming data output FREE Download
FastCalXP	FastCalXP calibration software that allows you to do a 10 point up and down calibration in less than 3 minutes. See Demo

Accessories

Part No.
2490	Soft carrying case is included with every 30 Series calibrator. The clear plastic cover protects the keypad while allowing operation of all buttons
3009	Hard carrying case (egg crate foam)
2888	Weatherproof hard carrying case (die-cut foam)
1928	RS232 cable (6ft) is required for software downloads with the 30 Series calibrator
3313	Adapter USB B receptacle to RS232 DB9M (also requires Part No.1928, RS 232 cable)
1351	Test Leads Cable to read milliamps on a 30 Series