Measure / Calibrate: XP2i Digital Pressure Gauge

World's Most Popular Test Gauge

Ultra rugged, intrinsically safe, digital pressure test gauge with 0.1% of reading accuracy.

Marine grade enclosure resists corrosion
Accuracy not affected from -10 to 50°C
Replaces 5 or more digital test gauges
Option: Records 6000 points with DataLoggerXP
Fast pressure safety valve (PSV) mode
Define custom pressure units
Shift everyday wear to replaceable CPF adapter
Easy to use-No Menu. No Manual? No Problem!

Applications

Field gauge calibration

Permanent outdoor installation

Burst disc testing

Pressure safety valve (PSV) testing

Hydraulic torque wrench indication

Torque datalogging

Pressure regulator testing

Pipeline static pressure testing

Chart recorder replacement

Wellhead monitoring

Filter performance testing

Hydrostatic leak testing

Included with every new XP2i Digital Pressure Gauge is an A2LA accredited calibration certificate with test data recorded at 5 different temperatures - proving that it meets published specifications over the entire operating range. You won't get this kind of detailed report anywhere else!

Application Notes

AN-006 Pressure Safety Valve Testing

Specifications

Digital Pressure Gauge specifications include all effects of linearity, hysteresis, repeatability, temperature, and stability for one year.

Accuracy
20% to 100% of Full Scale: ±(0.1% of Reading).
0 to 20% of Full Scale: ±(0.02% of Full Scale).
Vacuum, for 2MPa (300 PSI, 20 bar, 20kg/cm²) and lower pressure gauges:
0 to -99.9 kPa (-14.5 PSIG): ±(0.25% of Full Scale), where F.S.: -99.9 kPa (-14.5 PSIG).
(Not recommended for continuous use at high vacuum.)

Pressure Ranges
(see table below for details)

Note:
Density of water conversion can be selected via the keypad: 4°C, 60°F or 20°C/68°F.

Temperature
Operating & Compensated: -10°C to 50°C (14°F to 122°F).
Storage: -40°C to 75°C (-40°F to 167°F).

Backlit Display
Description: 5 Full (seven segment) digits.
Display rate: 3 readings per second.
Numeral display height: 16.5mm (0.65") single line display or 14 mm (0.55") for main numerals of dual line display.

Sensor
Description: All welded stainless steel, with a permanent fill diaphragm seal (filled with Dow Corning 200).

Power
Battery: Three size AA (LR6) batteries.
Battery life: 1500 hours typical (alkaline battery).

Enclosure
Description: Aluminum alloy, sealed to IP67 per IEC 60529 ratings. (Excludes the WT Series)
Weight: 555g (19.6 oz.), including batteries.

Media Compatibility
Liquids and gases compatible with 316 stainless steel

Intrinsic Safety

XP2i CSA Certificate of Compliance      Intrinsically Safe and Non-Incendive for Hazardous Locations: Class I, Division 1, Groups A, B, C & D, Temperature code T4

XP2i ATEX EC Declaration of Conformity    II 1G Ex ia IIC T4   KEMA 04 ATEX 1053 X

XP2i IECEx Certificate of Conformity     II 1G Ex ia IIC T4   IECEx CSA 05.0001X

Other Certifications

DNV Certificate DNV classification certifies all materials, components and systems relevant to the safe operation and quality of ships.

CE Declaration of Conformity

Complies with Australian requirements for the C-tick mark. The XP2i was tested against AS/NZS 3584, C-tick EMC/EMI requirements.

Dimensions / Connections

Electrical connection: DB9, RS-232 (environmentally sealed).

.

Pressure Ranges

PSI	bar	kPa		Pressure Units and Resolution
P/N Prefix	P/N Prefix	P/N Prefix	Over pressure	PSI	kg/cm²	inch Hg	inch H₂O	mm Hg	mm H₂O	kPa	bar	mbar
15PSI	1BAR	100KPA	6.5x	0.001	0.0001	0.001	0.01	0.01	1	0.01	0.0001	0.1
30PSI	2BAR	200KPA	3.0x	0.001	0.0001	0.001	0.01	0.1	1	0.01	0.0001	0.1
100PSI	7BAR	700KPA	2.0x	0.01	0.0001	0.01	0.1	0.1	1	0.01	0.0001	0.1
300PSI	20BAR	2KKPA	2.0x	0.01	0.001	0.01	0.1	1		0.1	0.001	1
500PSI	30BAR	3KKPA	2.0x	0.01	0.001	0.1	1	1		0.1	0.001	1
1KPSI	70BAR	7KKPA	2.0x	0.1	0.001	0.1				0.1	0.001	MPa
2KPSI	140BAR	14KKPA	2.0x	0.1	0.01	0.1				1	0.01	0.001
3KPSI	200BAR	20KKPA	1.5x	0.1	0.01	0.1				1	0.01	0.001
5KPSI	300BAR	30KKPA	1.5x	0.1	0.01	1				1	0.01	0.001
10KPSI	700BAR	70KKPA	1.5x	1	0.01					1	0.01	0.001

Unneeded pressure units may be disabled via the RS-232 connector using ConFigXP software. • kPa models can display pressure in kPa and bar (or mbar) only. PSI and bar models can display all available units. • An XP2i will indicate pressure up to 10% above Range Pressure. Above 110%, the XP2i display will flash, indicating that the applied pressure exceeds the calibrated pressure range. If the calibrated pressure range is exceeded, the pressure displayed may not be accurate. • An Absolute version is available for XP2i gauges with ranges of 2000 PSI and higher. • MPa is available on -DD models only.

Options

Part No.	XP2i Digital Pressure Gauge Options
-DD	Dual Line Display Adds a second line to the display which can be set to indicate peaks, average, leak rate or differential pressure when connected to a second pressure gauge connected via an ordinary DB-9 null modem cable. Great for relief valve or leak testing. Cannot be ordered with the -DL DataLogging option.
-DL	DataLoggerXP Allows you to record up to 6000 measurements. The software application handles all of the transfer and saving of data to your computer's hard drive, while the XP2i once authorized, performs all of the actual data collection
-B	Absolute Pressure Available for gauges rated at 2000 PSI or higher
-F4	Panel Mounting Includes a 4.5 inch gauge panel mount kit with a rear pressure port. Picture shows the kit installed. To replace a 6 inch or 8.5 inch panel mount gauge, you will need to order part number 2955 for the 6 inch flange adapter or part number 2956 for the 8.5 inch flange adapter. Installation instructions.
-RP	Rear Port Fitting The rear port fitting can be ordered separately but is included automatically with the panel mount flange option (F4)
-O	Cleaned for Oxygen Service For applications requiring cleaning for oxygen
-BSP	G 1/4 B Parallel Pressure Fitting (Not available for PSI Models)

Software

Part No.
-DL	DataLoggerXP Allows you to record up to 6000 measurements. The software application handles all of the transfer and saving of data to your computer's hard drive, while the XP2i once authorized, performs all of the actual data collection
ConFigXP	ConFigXP-Free Allows you to customize your gauge by adding or disabling features
FastCalXP	FastCalXP calibration software that allows you to perform a 10 point up and down calibration in less than 3 minutes. See Demo
LabVIEW driver	LabVIEW driver - Free If using LabVIEW, the driver library implements the serial commands of the XP2i and provides parsing of the streaming data output
Crystal USB Driver	Crystal USB driver - Free Driver for part# 3313 USB-RS232 Adapter
Firmware upgrade	XP2iUpdate - Free Update your gauge to the latest Firmware to add new features like our fast Pressure Safety Valve (PSV) test mode
UnitCalc	UnitCalc - Free Easy Pressure Unit Calculator. Displays all conversion factors and converted units at the same time. UnitCalc also calculates Head Correction, Gravity Correction and Air Density

Accessories

Part No.
3193	Digital Pressure Gauge Protective Boot - Ist Generation Gauge (Black Gasket around Gauge) A Skydrol compatible elastomeric boot to increase shock resistance
3696	Digital Pressure Gauge Protective Boot - 2nd Generation Gauge (No Black Gasket around Gauge) A Skydrol compatible elastomeric boot to increase shock resistance
3009	Hard Carrying Case (egg crate foam)
2888	Weatherproof Hard Carrying Case (die-cut foam)
2400	RS232 Cable (6ft)
3456	Null Modem Adapter A null modem for differential pressure testing between two XP2i gauges
3313	Adapter USB B receptacle to RS232 DB9M
2955	Flange Adapter Kit 6 inch flange adapter kit requires a gauge with the -F4 panel mount option
2956	Flange Adapter Kit 8.5 inch flange adapter kit requires a gauge with the -F4 panel mount option
2984	Universal AC Power Supply Includes a set of plugs permitting use worldwide. In the event of a power failure, an XP2i powered by the AC power supply will automatically switch to its internal batteries
Contact Crystal	Diaphragm and sanitary seals

Product Downloads

>> ConFigXP >> DataLoggerXP >> Datasheet - psi >> Datasheet - bar >> Datasheet - kPa >> Brochure >> Manual >> Manual w/ CPF >> Product Overview >> ComboPump Connection Diagram >> HydraulicPump Connection Diagram

Our Products